Installation Guide

Resources >> PVC Pipe Applications >> Sanitary Sewer >> Installation Guide

DESIGN AND INSTALLATION GUIDE: PVC FITTINGS & LATERALS FOR SOLID-WALL PVC SEWER PIPE

This document has been developed by the Uni-Bell PVC Pipe Association for design and installation of PVC fittings where solid-wall PVC pipe is used in non-pressure applications. The guide provides information on the wide range of fittings that are available for various dimension ratios and outside diameters of PVC pipe through 60-inch. Also included is information on installation practices.

INSTALLATION GUIDE

This Uni-Bell Technical Publication (UNI-PUB-6) provides guidance on installing PVC sewer pipe.

RISER INSTALLATION

This Uni-Bell Technical Bulletin summarizes installation guidelines for risers.

SPECIFICATION FOR LOW-PRESSURE AIR TESTING SEWERS

Low-pressure-air testing is often preferred over infiltration or exfiltration testing for verifying the integrity of a newly installed sewer. Uni-Bell's recommendations for performing this test are available in: "UNI-B-6, Recommended Practice for Low-Pressure Air Testing of Installed Sewer Pipe."