PVC Pipe Association Header
PVC Pipe Association Logo

 

 

PVC PIPE SUPPORT > INSTALLATION > GUIDE
DESIGN AND INSTALLATION GUIDE - PVC FITTINGS & LATERALS FOR SOLID-WALL PVC SEWER PIPE

This document has been developed by the Uni-Bell PVC Pipe Association for design and installation of PVC fittings where solid-wall PVC pipe is used in non-pressure applications. The guide provides information on the wide range of fittings that are available for various dimension ratios and outside diameters of PVC pipe through 60-inch. Also included is information on installation practices.

INSTALLATION GUIDE FOR GASKETED-JOINT PVC PRESSURE PIPE

This Uni-Bell technical publication (UNI-PUB-9) provides guidance on installing PVC pressure pipe.

INSTALLATION GUIDE FOR SOLID WALL PVC SEWER PIPE

This Uni-Bell technical publication (UNI-PUB-6) provides guidance on installing PVC sewer pipe.

 

Tapping Guide For PVC Pressure Pipe

This Uni-Bell technical publication (UNI-PUB-8) provides guidance on proper tools and procedures for tapping PVC pressure pipe. It discusses direct taps, saddle taps, and taps through a sleeve and valve. 

 

ABOUT US | MEMBERS | EVENTS | TECHNICAL BLOG | SUSTAINABLE CITIES | CONTACT | SITE MAP
UNI-BELL PVC PIPE ASSOCIATION
2711 LBJ Freeway, Suite 1000 | Dallas, TX 75234 | PH: 972.243.3902 | FX: 972.243.3907
All rights reserved 2011
Find us on LinkedIn Follow us on Facebook Follow us on Twitter