PVC Pipe Association Header
PVC Pipe Association Logo

 

 

PVC PIPE APPLICATIONS > SANITARY SEWER > INSTALLATION GUIDE
Design and Installation Guide: PVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe

This document has been developed by the Uni-Bell PVC Pipe Association for design and installation of PVC fittings where solid-wall PVC pipe is used in non-pressure applications. The guide provides information on the wide range of fittings that are available for various dimension ratios and outside diameters of PVC pipe through 60-inch. Also included is information on installation practices.

installation guide

This Uni-Bell Technical Publication (UNI-PUB-6) provides guidance on installing PVC sewer pipe.

RISER installation

This Uni-Bell Technical Bulletin summarizes installation guidelines for risers.

specification for low-pressure air testing sewers

Low-pressure-air testing is often preferred over infiltration or exfiltration testing for verifying the integrity of a newly installed sewer.  Uni-Bell's recommendations for performing this test are available in: "UNI-B-6, Recommended Practice for Low-Pressure Air Testing of Installed Sewer Pipe."

 

ABOUT US | MEMBERS | EVENTS | TECHNICAL BLOG | SUSTAINABLE CITIES | CONTACT | SITE MAP
UNI-BELL PVC PIPE ASSOCIATION
2711 LBJ Freeway, Suite 1000 | Dallas, TX 75234 | PH: 972.243.3902 | FX: 972.243.3907
All rights reserved 2011
Find us on LinkedIn Follow us on Facebook Follow us on Twitter